|
DESCRIPTION
The Models VT 2400, VT 3000 and VT 3600 are a cost effective
alternative for automatic cutting of skin packaging products. These
machines feature an intermittent motion in-feed conveyor belt to transfer
skin packaged cards to the slitting and die cutting area. Circular cutters
are used for longitudinal slitting and a hydraulic cross cutting system
also rounds the comers and cuts hanger holes. An out-feed conveyor belt
discharges the cut packages from the machine.
The VT Series machines have adjustable slitter heads to
cut different sized packages. Single and double cutter heads are available
for common and gutter ruled layouts. Die cutting is with a narrow steel
rule die. These dies are lightweight, low cost and are easily changed.
Card length is determined by the in-feed conveyor program. Multiple
programs may be stored in the in-feed conveyor controller.
OPERATION
The
operator places the finished skin card on the in-feed conveyor. The
card is lined up with the left and rear alignment guides. The START
button is pressed and the card automatically advances to the hydraulic
trim press and the slitter heads where the card is cut into individual
packages. Finished packages are conveyed from the machine out-feed.
The process is repeated after each cycle is completed.
[
View Models Specs ]
|
